Vehicle Performance Engineering

Vehicle Performance Engineering

Vehicle performance is the study of the motion of a vehicle. The motion of any vehicle depends upon all the forces and moments that act upon it. These forces and moments, for the most part are caused by interaction of the vehicle with the surrounding medium(s) such as air or water (e.g. fluid static and dynamic forces), gravitational attraction (gravity forces), Earth’s surface (support, ground, or landing gear forces), and on-board energy consuming devices such as rocket, turbojet, piston engine and propellers (propulsion forces). Consequently, in order to fully understand the performance problem, it is necessary to study and, in some way, characterize these interacting forces.

How To Build An Electric Vehicle?

How To Build An Electric Vehicle?

Disruption in the Automotive and Transportation industry is well under way. How we get from Point A to Point B is being reinvented due to increasing urbanization. This is driving the convergence of autonomous, electrification, connectivity and shared transportation systems rapidly. Auto OEMs and suppliers have to develop and execute new business models to prevent becoming obsolete as these mega trends unfold and technology innovation increases exponentially. The race is on for Auto OEM’s and suppliers to transform their business and provide multimodal mobility services for the future of mobility.

Simcenter Simulation: The Key to Make Safe Autonomous Vehicles

Simcenter Simulation: The Key to Make Safe Autonomous Vehicles

As vehicles become more automated with advanced driver assistance systems (ADAS), development and validation testing conditions need to be defined. Which scenarios should be considered for ADAS and future autonomous vehicles (AVs)? How can a large number of potential driving situations be considered and how can the most critical ones be identified? Can verification and validation (V&V) be managed in a realistic timeframe and at an acceptable cost? This blog post highlights a process applied during vehicle development, and discusses the support Siemens Digital Industries Software and ETS Solutions Asia engineering services team can provide.

Acoustic Testing: Things You Need To Know

Acoustic Testing: Things You Need To Know

Acoustics is the study of sound, noise, and vibration. Understanding the acoustical performance of your product is important because different types of devices have different thresholds for acceptable amounts of acoustic noise. Acoustic testing services assess how your product will perform in real-world conditions, and whether or not further revisions should be made to reduce noise. Acoustical testing helps product manufacturers from various industries determine these values.

NVH Testing for Automotive

NVH Testing for Automotive

NVH, which stands for Noise, Vibration, and Harshness, is the study of the noise and modification vibration characteristics of vehicles and is basically a measure of how much unpleasant aural and tactile feedback the vehicles deliver as you drive. NVH testing enables early recognition of NVH phenomena, which can then be avoided early during the development stage of the powertrain. This later makes driving in the production vehicle more comfortable and serves to avoid complaints and a loss of image.

Acoustic Testing

Acoustic Testing

Acoustic Testing is performed to determine if the material can resist the specified Acoustic environment. It must resist this environment without degradation of its functional performance and/or structural integrity. Acoustic Testing or Acoustic Emission Testing is the measurement of sound emissions radiating from the equipment under test. In other words, how loud is the equipment?

HALT/HASS Testing Guidance

HALT/HASS Testing Guidance

This paper will give you guideline all about HALT/HASS Testing, from definitions, the difference, applications and industries that should involve/conducting HALT/HASS Testing, and this paper also include with Test Equipment for your organization to conduct HALT/HASS Testing.

MIL-STD-810 Testing Guideline

MIL-STD-810 Testing Guideline

MIL-STD-810 standard contains test methods and planning for engineering direction for considering the influences that environmental stresses have on material, products or equipment through every phase of their service life. Used by the U.S. military to test product limits and capabilities that the product will experience throughout its life, MIL-STD-810 testing is also used as a standard for rugged commercial products.

Software and Hardware Solutions for Simulation and Testing Engineering

Software and Hardware Solutions for Simulation and Testing Engineering

ETS Solutions Asia is a leading provider of technologies, consultancy, products and services in various sectors, including industry solutions from Siemens Digital Industries Software. Specializing in Simulation & Test, we help companies establish a competitive advantage by optimizing their processes, from planning and development through manufacturing, production and support.

Maximising Battery Life Checklist

Maximising Battery Life Checklist

This report outlines some of the most common cell failures and suggests preventative measures which need to be considered when specifying cells for a new battery application.

Battery Temperature Test Chamber

Battery Temperature Test Chamber

Different environmental conditions such as extreme heat, extreme cold, moisture or other variables can influence a device failure in various ways. In today’s world, we all expect fault-free products and uninterrupted operations and services and in order to guarantee 100% performance, manufacturers from various industries must conduct environmental simulation tests of their products.

Batteries in Electric Vehicles, How Long Do They Last?

Batteries in Electric Vehicles, How Long Do They Last?

While it is true that electric cars lose battery capacity over time. The continuing advances in technology in precise degradation are difficult to define as a whole. The main factor is all down to the owner and how they treat the battery. The way energy is added, the way it is removed. And how many charging cycles, the battery experiences look after your battery and your battery will look after you.

Sine Vibration Testing

Sine Vibration Testing

Sine Vibration Testing may be considered as the most basic vibration testing method used. This type of vibration testing requires less complex parameters compare to other type of vibration testing. Knowing the nature of sinusoidal signal, makes this type of vibration testing easier to understand and to get familiar with. Though, easier to understand does not make it less important compare to other type of vibration testing. Sine vibration testing may still be at the top rank when we are thinking of dynamic characteristic measurement.

Karma Automotive: Excellence NVH Performance with Simcenter

Karma Automotive: Excellence NVH Performance with Simcenter

Karma Automotive established a strategic partnership with Simcenter Engineering and Consulting services to meet NVH performance targets and implement state-of-the-art NVH testing and simulation processes. Simcenter™ software uniquely combines system simulation, 3D CAE and test to help you predict performance across all critical attributes earlier and throughout the entire product lifecycle.

Electric Vehicle Manufacturer Moves Quickly with Simcenter and NX

Electric Vehicle Manufacturer Moves Quickly with Simcenter and NX

Revolutionizing productivity, Electra Meccanica moved quickly, transforming a napkin sketch into a digital NX™ software design in a matter of days, then using Simcenter™ software to optimize and validate the performance of the all-electric SOLO. Finally, using NX CAM and 3D printing, Electra Meccanica built its dream car.

Providing safe and efficient vibration qualification testing

Providing safe and efficient vibration qualification testing

For your vibration qualification tests, the unique combination of Simcenter SCADAS™ hardware, Simcenter Testlab™ software and ETS Solutions expertise in vibration testing, delivers outstanding performance for all standard and advanced testing requirements. This includes tests based on tailored profiles, interfaces with test cells or climatic chambers, and tests based on newer techniques such as the military standard (MIL-STD) 527 method.

Make Autonomous Vehicles Safe - White Paper

Make Autonomous Vehicles Safe - White Paper

This white paper provides insight into Siemens Digital Industries Software’s solution to verify and validate high-integrity systems operating in autonomous environments, on a mass scale and across the entire system of systems.

Counter Measuring Product Durability Issue by Evaluating Structural Dynamic Characteristic

Counter Measuring Product Durability Issue by Evaluating Structural Dynamic Characteristic

In such industry that is facing tough market competition like automotive industry, having product durability issue during prototype testing and validation stage will be quite challenging, or sometime even quite frustrating. Especially when you are the testing engineer or project manager that has to ensure that all prototype testing and validation is done within the schedule.

Electric Vehicles Battery Testing

Electric Vehicles Battery Testing

The global population of Electric Vehicle have been significantly increased within the latest few years. All major automakers recognize that the shift from fossil-fueled cars to EV is inevitable, and are investing accordingly. BATTERY, as one of the most CRITICAL part of electric vehicle is also having significant development period in order to fulfill the requirement from Electric Vehicle manufacturer.

Electric Vehicle’s Battery Testing Standard

Electric Vehicle’s Battery Testing Standard

The global population of Electric Vehicle have been significantly increased within the latest few years and it is forecasted that the sales of new Electric Vehicle will reach around 35% of total new car sales in 2025.